Filter Above Ground

2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward

2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward

2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward    2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US. Powerful Self-Priming IP55 2.5HP Electric Motor. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 520L/min.

Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty - Designed to run 24/7. Works with In ground and Above Ground. Ideal for Residential/Commercial Swimming Pools & Spa's.

Head:Max 18m / 59ft. Pipe Compatibility:Fit 1.5 inch plumbing internally.

Weight: 11 kg /24 lbs. Power cord length:1.5m/59inch. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight.

The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump.

Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. 1x 59inch Power cord w/US plug.

(No service on Weekend and public holidays). All return products should be in brand new state with all accessories included.

This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps". The seller is "greenenv" and is located in this country: US. This item can be shipped to United States.

  • Model: SPP1800A
  • Outlet: 1.5inch
  • Max Water Temperature::: 50℃/122℉
  • Speed: Single
  • Warranty:: Lifetime
  • Item Height: 13.4''
  • Pump Housing Material:: PPGF30 + PC (anti-Oxident)
  • Frequency: 60Hz
  • IPX5 CAP:: 60μF/250V AC
  • Item Width: 6.7''
  • Power cord length: 1.5m/59in
  • Phase: Single
  • Thread diameter :: G2.25\
  • Plug: US plug
  • Max. Temp:: 104 Degree Fahrenheit (40 Degree Celsius)
  • Capacitor:: 25 F
  • Type: Swimming pool pump
  • Installation: Universal Installation
  • Minimum Pump Power Requirement: 2.5HP
  • Item Weight: 24lb
  • Brand: iMeshbean
  • Manufacturer Warranty: Lifetime
  • Amperage: 16A
  • Water Type: All Water Types
  • Material: ABS, Cast Iron, Copper, Stainless Steel
  • Maximum Head Lift: 18M/59FT
  • Power Source: Electric, Corded
  • Features: Chlorine Resistant, Easy Installation, Noise Vibration Reduction, Rust Resistant, Single-Speed
  • Item Length: 25.6''
  • Power: 1850W
  • Set Includes: Pool Pump, 2pc 1.5in NPT connectors, Fittings, Full Instructions
  • Recommended Flow Rate: 520L/min
  • Suitable For: Above Ground Pools, Hot Tubs, Inflatable & Kid Pools, In Ground Pools
  • Maximum Flow Rate: 560L/min
  • Labels & Certifications: UL, CE-Approved
  • Inlet: 1.5inch
  • RPM: 3450r/min
  • Noise level: ≤65dB
  • Amps: 16A
  • Max. Temperature: 140 ℉/60 ℃
  • Energy Star: A+++
  • Voltage: 110 V-120 V


2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward    2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer for Hayward