Filter Above Ground

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske
2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske
2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske
2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske
2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske
2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske   2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo W/ Strainer Baske. Powerful Self-Priming IP55 2.5HP Electric Motor. Suitable for pools up to 100,000 litres.

Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible.

Full Commercial Duty - Designed to run 24/7. Works with In ground and Above Ground. Ideal for Residential/Commercial Swimming Pools & Spa's. Pipe Compatibility:Fit 1.5 inch plumbing internally. Weight: 10.2 kg / 22.5 lbs.

Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump.

Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump.

The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. (No service on Weekend and public holidays).

All return products should be in brand new state with all accessories included. The item "2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske" is in sale since Wednesday, September 16, 2020. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps". The seller is "greenenv" and is located in Pasadena, Texas. This item can be shipped to United States.

  • Inlet: 1.5inch
  • Outlet: 1.5inch
  • Pool Type: Above-Ground
  • Package size: 24x8.07x14inch(LxWxH)
  • Weight: 22.5lbs
  • Noise level: <65dB
  • Type: Swimming pool pump
  • MPN: SPP1800A
  • Brand: Unbranded
  • Horsepower: 2.5hp
  • Speed: 560 L/m
  • RPM: 3450
  • Amps: 6.8
  • Frequency: 60Hz
  • Voltage: 110V


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske   2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske